The FT810DB 10-Bit Digital Video and Data transmission products, support fiber optical transmission of 10-Bit PCM coded video with two bi-directional data and features high-performance laser-based optics for the clearest, most reliable data transmission in both single and multimode with no video degradation over the entire operating distance (up to 20 km).
This plug-and-play product family provides instant compatibility for most major security manufacturers' equipment and reliability in harsh environments, a perfect compliment to any commercial, government or intelligent transportation application. The product features standalone type.
Video -
- NTSC or PAL video standards supported
- Non-compressed 10-bit digitally encoded video
- No video degradation over the maximum operating distance
Data -
- Meets EIA RS-232/422/485 specifications
- Full RS-485 Tri-state support
- Half or full-duplex operation
- Transparent to data encoding
- Data rates from 0 to 256kbps
Optical -
- One fiber design
- High performance laser-based optics
- Multimode or Singlemode
- ST connector available
Robust Design -
- Plug-and-Play design, no in-field adjustments required
- Wide operating temperature range of -40ºC to +75ºC
- Designed for use in harsh environments
Ordering Information -
| Fiber Type | Part Number | Description | Wavelengths (nm) |
Optical Power Budget(dB) | Max. Distance(Km) |
| Multi-mode (62.5/125μm) |
FT820DB-SMTSA | 8-ch Video Transmitter / Receiver with 2-ch bidirectional Data Transceiver | 1310 | 1550 | 23 | 1 |
| FT820DB-SMRSA | 8-ch Video Transmitter / Receiver with 2-ch bidirectional Data Transceiver | ||||
| Single-mode (9/125μm) |
FT820DB-SSTSA | 8-ch Video Transmitter / Receiver with 2-ch bidirectional Data Transceiver | 1310 | 1550 | 17 | 20 |
| FT820DB-SSRSA | 8-ch Video Transmitter / Receiver with 2-ch bidirectional Data Transceiver | ||||
| Multi-mode (62.5/125μm) |
FT820DB-SMT | 8-ch Video Transmitter / Receiver with 2-ch bidirectional Data Transceiver, Card module | 1310 | 1550 | 23 | 1 |
| FT820DB-SMR | 8-ch Video Transmitter / Receiver with 2-ch bidirectional Data Transceiver, Card module | ||||
| Single-mode (9/125μm) |
FT820DB-SST | 8-ch Video Transmitter / Receiver with 2-ch bidirectional Data Transceiver, Card module | 1310 | 1550 | 17 | 20 |
| FT820DB-SSR | 8-ch Video Transmitter / Receiver with 2-ch bidirectional Data Transceiver, Card module |
| Power Adaptor | - Power adaptor is included for Standalone type. |
| Rack Mount Chassis | - FT-C19 is to be purchased separately. Please refer to accessories section for the details. |
| Video | |
| Number of Channels | 8 |
| Format | NTSC/PAL/SECAM |
| Input/Output | 1 Volt pk-pk (75 ohms) |
| Bandwidth | >=6MHz |
| Differential Gain | <1% Typical |
| Differential Phase | <1 Degree Typical |
| SNR-CCIR weighted | >65dB |
| Data | |
| Number of Channels | 2 |
| Data Direction | Bi-directional |
| Data Interface | RS232, RS422, RS485 2 or 4-wire Tri-state |
| Selection Method | DIP switch-selectable |
| Data Rate | 0~256kbps |
| Data Format | MPD (Manchester, Bi-phase, etc) |
| LED | |
| Video Signal Indication (Presence) | Green and Red LED lit |
| Data In / Out | Yellow and Green LED lit |
| Optical Carrier Detected | Green / Active |
| Power | Red / On |
| Connectors | |
| Video Input / Output | BNC |
| Optical Input / Output | ST (standard), Card |
| Data Input / Output | RJ45 |
| Power (Standalone) | 2-pin screw terminal |
| Power(Rack-Mount) | Bus connector |
| Electrical and Mechanical | |
| Power(Standalone) | 12VDC @ 5.6W |
| Power(Rack Mount) | From FT-C19 Chassis |
| Dimensions(Standalone) | 179.5 x 137.4 x 50.7mm |
| Dimensions(Rack Mount) | 131.3 x 20.3 x 180.2mm |
| Shipping Weight(Standalone) | 0.64kg |
| Shipping Weight(Rack Mount) | 0.16kg |
| Environmental | |
| Operating Temp | -40°C to +75°C |
| Storage Temp | -40°C to +85°C |
| Relative Humidity | 0 to 95% non-condensing |
| MTBF | > 100,000 hours |
