Main Features -
Redundant Ring
- IES82162XMH-S-RP supports redundant ring and features strong, rapid self-recovery capability to prevent interruptions and external intrusions. It incorporates advanced ITU-T G.8032 ERPS (Ethernet Ring Protection Switching) technology, Spanning Tree Protocol (802.1s MSTP) into customer’s network to enhance system reliability and uptime in various environments.
- The recovery time could be less than 20ms to quickly bring the network back to normal operation.
- The series is also a good solution for 24hr non-stop operation, providing maximum reliability and productivity.
Trap Event Alert via CLI/Web/SNMP
- IES82162XMH-S-RP provides event alert function, by triggering notification through CLI/Web/SNMP and system log, when there is malfunction in the network.
Flexible and Extendable 10Gb Ethernet Solution
- Multiple 10Gbps speed fiber ports deliver improve business productivity by providing faster data transfer speeds, improved reliability, and increased scalability.
Dual Power Input for High Reliability
- Automatically switch to secondary power input when primary power input fails, ensuring continuous operation without down time.
- Redundant power supply reduces possibility of single-point-of-failure.
Hardened Grade
- As an industrial grade switch, IES82162XMH-S-RP is designed specifically to withstand extreme weather environment including high humidity and exposure to moisture.
- With a wide temperature operating range (-40°C to 75°C) with rugged cases enclosures for faster heat dissipation and greater protection, which allows them to operate perfect for any complex environmental installations like remote highways or railways.
Other Features -
- Layer 3 with 16 x 100/1000Base-SFP + 4 x 10GBase-SFP + 8 x 10/100/1000Base-SFP or 10/100/1000Base-TX Combo
- Support Auto-MDIX, and Full/Half Duplex self-negotiation mode
- Provide SC/FC/ST/LC interface fiber port, Support single/dual fiber transmission
- Layer 3 Model support OSPFv2, RIPv2, Static Route
- Support 10K bytes jumbo frame, compatible with various extension protocols
- Electric 8KV surge protection, easy to use in outdoor environment
- IEEE 802.1Q tagged 4K VLANs groups, out of 4094 VLAN IDs
- Supports provider bridging (VLAN Q-in-Q, IEEE 802.1ad)
- AC Power Input
Ordering Information -
| Available Model | Description |
| IES82162XMH-S-RP | L3 Hardend Grade Managed 16-port 100/1000Base-SFP + 4-port 10GBase-SFP + 8-port 10/100/1000Base-SFP or 10/100/1000Base-TX Combo Optical Ethernet Switch |
| Optional Accessories (to be purchased separately) | |
| SFP | (S)=SFP Option. Please select your SFP on our SFP Modules page for details. |
| Package Checklist | |
| - Managed Ethernet Switch | x 1 |
| - AC Power Cable | x 2 |
| - Mounting Accessory | x 1 |
| - Quick Installation Guide | x 1 |
| Ethernet | ||||
| IEEE 802.3 | 10Base-TX 10Mbit/s Ethernet | |||
| IEEE 802.3u | 100Base-TX, 100Base-FX, Fast Ethernet | |||
| IEEE 802.3ab | 1000Base-TX Gbit/s Ethernet over twisted pair | |||
| IEEE 802.3z | 1000Base-X Gbit/s Ethernet over Fiber-Optic | |||
| IEEE 802.3x | Flow control for Full Duplex | |||
| IEEE 802.3az | EEE (Energy Efficient Ethernet) | |||
| IEEE 802.3ah | EFM-OAM | |||
| IEEE 802.1Q | Virtual LANs (VLAN) | |||
| IEEE 802.1X | Port based and MAC based Network Access Control, Authentication | |||
| IEEE 802.1d | STP (Spanning Tree Protocol) | |||
| IEEE 802.1w | RSTP (Rapid Spanning Tree Protocol) | |||
| IEEE 802.1s | MSTP (Multiple Spanning Tree Protocol) | |||
| ITU-T G.8032 / Y.1344 | ERPS (Ethernet Ring Protection Switching) | |||
| IEEE802.3ac | Max frame size extended to 1522Bytes | |||
| IEEE 802.3ad | Link aggregation for parallel links with LACP(Link Aggregation Control Protocol) | |||
| IEEE 802.1ad | Q-in-Q VLAN stacking | |||
| IEEE 802.1p | LAN Layer 2 QoS/CoS Protocol for Traffic Prioritization | |||
| IEEE 802.1ab | Link Layer Discovery Protocol (LLDP) | |||
| Switching Property | ||||
| Packet Buffer | 12Mbits | |||
| Jumbo Frame | 10Kbytes | |||
| MAC Address Table | 8K | |||
| Flow Control | IEEE 802.3x flow control for Full Duplex mode, Back pressure for Half Duplex mode | |||
| Data Processing | Store and Forward (Full/Half Duplex mode) | |||
| Switch Architecture | Delay time: < 7μs; Back-plane bandwidth: 128Gbps/non-blocking; | |||
| Packet forwarding rate: 96Mpps | ||||
| Network Interfaces | ||||
| RJ45 Port | 10/100/1000Base-TX, support auto negotiation speed, auto MDI/MDI-X function | |||
| Transmission Distance: 100m (using standard CAT5/CAT5e cable) | ||||
| SFP Port | 100/1000Base-SFP, support 100/1000M dual speed with DDMI | |||
| Transmission Distance: depends on SFP Module | ||||
| Console | RS-232 (RJ-45) | |||
| Power Supply | ||||
| Redundant Power Input | AC220V redundant | |||
| Removable Terminal Block | Provide 2 redundant power, alarm relay contact (optional), 6 Pin | |||
| Alarm Relay Contact | Relay outputs with current carrying capacity of 1A @24VDC | |||
| Overload Current Protection | Support | |||
| Reverse Polarity Protection | Support | |||
| Power Consumption | Full-load<30W | |||
| LED Indicator | ||||
| Power | Connect-always | |||
| RJ45 | Link/Act: connect-always; data exchange-twinkle | |||
| SFP | Link/Act: connect-always; data exchange-twinkle | |||
| Mechanical Specs | ||||
| Material | IP40 aluminum housing | |||
| Cooling | Passive cooling, fan-less design | |||
| Dimension | 440 x 300 x 45 mm | |||
| Installation | DIN Rail mounting, and wall mounting | |||
| Weight | 3Kg | |||
| Management Software | ||||
| Redundant Network | Support STP/RSTP | |||
| Support EAPS, ERPS (Recovery time<20ms) | ||||
| Routing | Support Static Routing | |||
| Multicast Support | Support IGMP Snooping | |||
| Support GMRP | ||||
| VLAN | Support IEEE 802.1Q 4K VLAN | |||
| Support Q-in-Q | ||||
| Link Aggregation | Support Manual Aggregation | |||
| Support Static/Dynamic LACP protocols | ||||
| QOS | Support COS, DSCP, 8 queues | |||
| Support WRR, SP, WFQ scheduling mode, policy QOS | ||||
| Diagnostic Maintenance | Support Port Mirroring | |||
| Support Syslog, | ||||
| Support Ping command, etc. | ||||
| Management Mode | Support CLI, WEB, SNMP | |||
| Alarm Management | Support 1 way relay alarm output | |||
| Support RMON management, TRAP alarm | ||||
| Security | Support DHCP Snooping, Option 82 | |||
| Support 802.1X security access | ||||
| Support user hierarchical management | ||||
| Support ACL access control list | ||||
| Support port-based MAC filtering / binding, MAC white-list | ||||
| Port Management | Support port enabled and disabled | |||
| Support port speed setting | ||||
| Support 802.3x flow control | ||||
| L3 management | ||||
| Static routing | IPV4 / IPV6 1024 (IPv4), 512 (IPv6) | |||
| Dynamic routing | RIP, OSPF, VRRP, ARP, ND | |||
| Console | Console in use | |||
| Login IP | 192.168.1.6 | |||
| User Name/Password | admin/admin | |||
| Environmental | ||||
| Operation Temperature | -40˚C to 75˚C (-40˚F to 167˚F) | |||
| Storage Temperature | -40°C to 85°C (-4°F to 185°F) | |||
| Relative Humidity | 5% to 95% non-condensing | |||
| MTBF | > 100,000 hrs | |||