Main Features -
Built-in Unique PoE Management Functions
Intelligent Power Recycling
- The network switch monitors transmission of data packets from powered devices (PDs) in real-time.
- The PoE of the Ethernet port will be reset in order to reboot the PD.
PoE Schedule for Energy Savings
- PoE scheduling can be pre-set on each PoE port to turn on/off PoE and set output power according to the schedule.
PoE Usage Monitoring
- Info such as voltage, current and temperature are available on web management interface.
- Enhances the management efficiently of facilities.
PoE+ Power and Ethernet Data Transmission Distance Extension
- Breaking the 100-meter limit, the PoE extending function can further extend Data and PoE up to 250 meters on UTP cable at 10Mbps for up to 16 PDs with 30W power output.
Redundant Ring
- IES16242MPp-S supports redundant ring and features strong, rapid self-recovery capability to prevent interruptions and external intrusions. It incorporates advanced ITU-T G.8032 ERPS (Ethernet Ring Protection Switching) technology, Spanning Tree Protocol (802.1s MSTP) into customer’s network to enhance system reliability and uptime in various environments.
- The recovery time could be less than 20ms to quickly bring the network back to normal operation.
- The series is also a good solution for 24hr non-stop operation, providing maximum reliability and productivity.
Trap Event Alert via CLI/Web/SNMP
- IES16242MPp-S provides event alert function, by triggering notification through CLI/Web/SNMP and system log, when there is malfunction in the network.
Other Features -
- L2+ Managed features provide easier manageability, robust security and QoS
- 16 10/100/1000Base-TX PoE+ ports + 4 10/100/1000Base-TX or 100/1000Base-SFP combo ports
- Support IEEE802.3af/at (up to 30W)
- IEEE 802.1Q tagged 4K VLANs groups, out of 4094 VLAN IDs
- Supports provider bridging (VLAN Q-in-Q, IEEE 802.1ad)
- IGMP v1, v2, v3 Snooping
- AC Power Input
- 19” 1U Rack-mount
Ordering Information -
| Available Model | Description |
| IES16242MPp-S | L2+ Managed 16-port 10/100/1000Base-TX (PoE+) + 4-port 10/100/1000Base-TX or 100/1000Base-SFP Combo Ethernet Switch |
| Optional Accessories (to be purchased separately) | |
| SFP | (S)=SFP Option. Please select your SFP on our SFP Modules page for details. |
| Package Checklist | |
| - Managed Switch | x 1 |
| - Mounting Accessory | x 1 |
| - RJ-45 Console Cable | x 1 |
| Ethernet | |
| Standards | IEEE 802.3 10Base-TX |
| IEEE 802.3u 100Base-TX | |
| IEEE 802.3u 100Base-FX | |
| IEEE 802.3ab 1000Base-TX | |
| IEEE 802.3z 1000Base-X | |
| Processing Type | Store-and-Forward |
| Switch Fabric | 56 Gbps |
| Forward Filter Rate | 14,880pps (10Mbps) |
| 148,800pps (100Mbps) | |
| 1,488,000pps (1000Mbps) | |
| Max Packet Length | 9K bytes |
| Address Table Size | 8K MAC Addresses |
| Connector | 16 x RJ45 |
| Optical Port | 4 x SFP 100/1000Base-SFP or RJ45 10/100/1000Base-TX |
| Console port | 1 x RJ45 |
| Electrical and Mechanical | |
| Input Power | 100~240VAC, 50~60Hz |
| Total PoE output power budget | Max. 360W |
| Power Consumption | Max. 40W without PD loading |
| Max. Power Consumption | 400W |
| LED Indicators | |
| Power | Power Status |
| Ethernet (Per Port) | Link/Activity |
| PoE Status | Indication of PoE Power applying |
| Dimensions | 434 x 295 x 45 mm |
| Weight | 3.7 Kg |
| Casing | Aluminium |
| Mounting Options | Rack Mount |
| Software Features | |
| Layer 2 Switching | |
| Spanning Tree Protocol | IEEE 802.1D STP, IEEE 802.1w RSTP, IEEE 802.1s MSTP |
| Trunking | Link Aggregation Control Protocol (LACP) IEEE802.3ad |
| - Up to 13 groups | |
| - Up to 4 ports per group | |
| VLAN | Supports up to 4K VLANs simultaneously (out of 4096 VLAN IDs) |
| - Port-based VLAN, 802.1Q tag-based VLAN, MAC-base VLAN, Management VLAN, Prvate VLAN Edge(PVE), Q-in-Q (double tag) VLAN, Voice VAN, GARP VLAN Registration Protocol | |
| DHCP Relay | - Relay of DHCP traffic to DHCP server in different VLAN. |
| - Works with DHCP Option 82 | |
| IGMP v1/v2/v3 Snooping | IGMP limits bandwidth-intensive multicast traffic to only the requesters. Supports 1024 multicast groups |
| IGMP Querier | IGMP querier is used to support a Layer 2 multicast domain of snooping switches in the absence of a multicast router |
| IGMP Proxy | IGMP snooping with proxy reporting or report suppression actively filters IGMP packets in order to reduce load on the multicast router |
| MLD v1/v2 Snooping | Delivers IPv6 multicast packets only to the required receivers |
| Routing | Support Static Routing |
| Security | |
| Secure Shell (SSH) | SSH secures Telnet traffic in or out of the switch, SSH v1 and v2 are supported |
| Secure Sockets Layer (SSL) | SSL encrypts the http traffic, allowing advanced secure access to the browser-based management GUI in the switch |
| IEEE 802.1X | - IEEE802.1X: RADIUS authentication, authorization and accounting, MD5 hash, guest VLAN, single/multiple host mode and single/multiple sessions |
| - Supports IGMP-RADIUS based 802.1X | |
| - Dynamic VLAN assignment | |
| Layer 2 Isolation Private VLAN Edge | PVE (also known as protected ports) provides L2 isolation between clients in the same VLAN. Supports multiple uplinks |
| Port Security | Locks MAC addresses to ports, and limits the number of learned MAC address |
| IP Source Guard | Prevents illegal IP address from accessing to specific port in the switch |
| RADIUS/ TACACS+ | Supports RADIUS and TACACS+ authentication. Switch as a client |
| Storm Control | Prevents traffic on a LAN from being disrupted by a broadcast, multicast, or unicast storm on a port |
| DHCP Snooping | A feature acts as a firewall between untrusted hosts and trusted DHCP servers |
| ACLs | Supports up to 256 entries. Drop or rate limitation based on: |
| - Source and destination MAC, VLAN ID or IP address, protocol, port, | |
| - Differentiated services code point (DSCP) / IP precedence | |
| - TCP/ UDP source and destination ports | |
| - 802.1p priority | |
| - Ethernet type | |
| - Internet Control Message Protocol (ICMP) packets | |
| - TCP flag | |
| Quality of Service | |
| Hardware Queue | Supports 8 hardware queues |
| Scheduling | - Strict priority and weighted round-robin (WRR) |
| - Queue assignment based on DSCP and class of service | |
| Classification | - Port based |
| - 802.1p VLAN priority based | |
| - Differentiated Services (DiffServ) | |
| - Classification and re-marking ACLs | |
| Rate Limiting | - Ingress policer |
| - Egress shaping and rate control | |
| - Per port | |
| Management | |
| DHCP Server | Support DHCP server to assign IP to DHCP clients |
| Remote Monitoring (RMON) | Embedded RMON agent supports RMON groups 1,2,3,9 (history, statistics, alarms, and events) for enhanced traffic management, monitoring and analysis |
| Port Mirroring | Traffic on a port can be mirrored to another port for analysis with a network analyzer or RMON probe. Up to N-1 (N is Switch’s Ports) ports can be mirrored to single destination port. A single session is supported |
| UPnP | The Universal Plug and Play Forum, an industry group of companies working to enable device-to-device interoperability by promoting Universal Plug and Play |
| s-Flow | The industry standard for monitoring high speed switched networks. It gives complete visibility into the use of networks enabling performance optimization, accounting/billing for usage, and defense against security threats |
| IEEE 802.1ab (LLDP) | - Used by network devices for advertising their identities, capabilities, and neighbors on an IEEE 802ab local area network |
| - Support LLDP-MED extensions | |
| Web GUI Interface | Built-in switch configuration utility for browser-based device configuration |
| CLI | For users to configure/manage switches in command line modes |
| Dual Image | Independent primary and secondary images for backup while upgrading |
| SNMP | SNMP version1, 2c and 3 with support for traps, and SNMP version 3 user-based security model (USM) |
| Firmware Upgrade | - Web browser upgrade (HTTP/ HTTPs) and TFTP |
| - Upgrade through console port as well | |
| NTP | Network Time Protocol (NTP) is a networking protocol for clock synchronization between computer systems over packet-switched |
| Other Management | - HTTP/HTTPs; SSH |
| - DHCP Client/ DHCPv6 Client | |
| - Cable Diagnostics | |
| - Ping | |
| - Syslog | |
| - Telnet Client | |
| Power over Ethernet (PoE) | |
| Port Configuration | Supports per port PoE configuration function |
| PoE Scheduling | Supports per port PoE scheduling to turn on/off the PoE devices (PDs) |
| Auto-checking | Check the link status of PDs. Reboot PDs if there is no responses |
| Power Delay | The switch provides power to the PDs based on delay time when PoE switch boots up, in order to protect switch from misuse of the PDs |
| Environmental | |
| Operating Temperature | 0°C to 50°C (32°F to 122°F) |
| Storage Temperature | -20°C to 70°C (-4°F to 158°F) |
| Relative Humidity | 10% to 90% non-condensing |
| MTBF | > 100,000 hrs |
| Regulatory Approvals | |
| EMC | CE (EN55032, EN55035) |
| EMI | FCC Part 15 Subpart B |
| EMS | EN61000-4-2 (ESD) EN61000-4-3 (RS) |
| EN61000-4-4 (EFT) EN61000-4-5 (Surge) | |
| EN61000-4-6 (CS) EN61000-4-8 (PFMF) EN61000-4-11 | |
| Safety | CE (EN60950-1) |
| Shock | IEC60068-2-27 |
| Freefall | IEC60068-2-32 |
| Vibration | IEC60068-2-6 |