OT Systems

Join E-News

HD-SDI Video

FT120AB End-of-Life

10-bit Digital 1-ch Video with 2-ch Bi-directional Audio

The FT120AB series features high-performance laser-based optics for the clearest, most reliable data transmission. The video and audio series fiber transmission products support fiber optic transmission of 8-Bit PCM coded video and 2 channels bi-directional audio in both single and multimode with no video degradation over the entire operating distance (up to 20km).
This budget-friendly plug-and-play product provides instant compatibility for most major security manufacturers' equipment and supports audio interface. Created for reliability in harsh environments, this series provides a perfect compliment to any commercial, government or intelligent transportation application. The product features in card module or standalone type.

 

Video -

  • NTSC or PAL video standards supported
  • Non-compressed 10-bit digitally encoded video
  • No video degradation over the maximum operating distance

Audio -

  • 20Hz – 20KHz Bandwidth
  • Transmit Balanced or Unbalanced Line-level Audio

Optical -

  • One fiber design
  • High performance laser-based optics
  • Multimode or Singlemode
  • ST or FC connectors available

Robust Design -

  • Plug-and-Play design, no in-field adjustments required
  • Hot-swappable design
  • Wide operating temperature range of -40ºC to +75ºC
  • Designed for use in harsh environments

Warranty -

  • Comprehensive Lifetime Warranty

Ordering Information -

Fiber Type Part Number Description Wavelengths
(nm)
Optical Power Budget(dB) Max. Distance(Km) No. of slots
Multi-mode
(62.5/125μm)
FT120AB-SMT 1-ch Video Transmitter / Receiver with 2-ch bidirectional Audio Transceiver 1310 | 1550 23 4 2
FT120AB-SMR 1-ch Video Transmitter / Receiver with 2-ch bidirectional Audio Transceiver
Single-mode
(9/125μm)
FT120AB-SST 1-ch Video Transmitter / Receiver with 2-ch bidirectional Audio Transceiver 1310 | 1550 17 20 2
FT120AB-SSR 1-ch Video Transmitter / Receiver with 2-ch bidirectional Audio Transceiver

 

Options - ST type connector is standard. For FC type, specify “F” in the suffix. E.g. FMT.
- For Standaone type, please add “SA”. E.g. SMTSA
- Please feel free to consult factory if longer transmission distance is required.
Power Adaptor - Power adaptor is included for Standalone type only.
Rack Mount Chassis - FT-C18 is to be purchased separately. Please refer to accessories section for the details.

 

Video
Number of Channels 1
Format NTSC/PAL/SECAM
Input/Output 1 Volt pk-pk (75 ohms)
Bandwidth >=6MHz
Differential Gain <1% Typical
Differential Phase <1 Degree Typical
SNR-CCIR weighted >65dB
Audio
Number of Channels 1
Audio Direction Bi-directional
Input / Output Type Balanced or Unbalanced
Input Level / Impedance 0 dBm(nominal), 10K ohms
Output Level +4dBm
Bandwidth 20Hz-20KHz
Signal-to-Noise Ratio(SNR) >66dB
LED
Video Signal Indication (Presence) Green LED lit
Audio In / Out Red/Green LED lit
Optical Carrier Detected Yellow / Active
Power Red / On
Connectors
Video Input / Output BNC
Optical Input / Output ST (standard), FC (optional)
Audio Input / Output 7-pin screw terminals
Power(Standalone) 2-pin screw terminal
Power(Rack-Mount) Bus connector
Electrical and Mechanical
Power(Standalone) 12VDC @ 5.4W
Power(Rack Mount) From FT-C18 Chassis
Dimensions(WxHxD)(Standalone) 156 x 50.5 x 223mm(Max)
Dimensions(WxHxD)(Rack Mount) 148 x 41.4 x 213mm(Max)
Shipping Weight(Standalone) 0.8kg (Max)
Shipping Weight(Rack Mount) 0.32kg (Max)
Environmental
Operating Temp -40°C to +75°C
Storage Temp -40°C to +85°C
Relative Humidity 0 to 95% non-condensing
MTBF > 100,000 hours

  • FT120AB User Manual
  • 08 Apr 2016
  • DOWNLOAD
  • Video Transmission Products Datasheet Pack
  • 26 May 2016
  • DOWNLOAD
  • HD & Video Transmission Products Catalog
  • 08 Apr 2016
  • DOWNLOAD
  • 2016 Product Selection Guide
  • 08 Apr 2016
  • DOWNLOAD