The 8-Bit Digital Video and Data Modules series FTD110DB-XXR3, the 3-channel video fiber receiver and data transceiver, features high-performance laser-based optics for the clearest, most reliable data transmission. The FTD110DB-XXR3 supports 3 independent channels of 8-bit PCM digital video with bi-directional data in both single and multi-mode with no video degradation over the entire operating distance (up to 20km), as well as RS-232/422/485 serial data.
This plug-and-play product provides instant product compatibility for most major security manufacturers' equipment and reliability in harsh environments, a perfect compliment to any commercial, government or intelligent transportation application. The product features in card module or standalone type.
These units are compatible with the FTD110DBMicro and FTD110DB transmitters.
Video -
- NTSC or PAL video standards supported
- Non-compressed 8-bit digitally encoded video
- 3 independent channel receiver in one module
- No video degradation over the maximum operating distance
Data -
- Meets EIA RS-232/422/485 specifications
- Full RS-485 Tri-state support
- Half or full-duplex operation
- Transparent to data encoding
- Data rates from 0 to 256kbps
Optical -
- Three independent fiber inputs
- High performance laser-based optics
- Multimode or Singlemode
- ST or FC connectors available
Robust Design -
- Plug-and-Play design, no in-field adjustments required
- Hot-swappable design
- Wide operating temperature range of -40ºC to +75ºC
- Designed for use in harsh environments
Warranty -
- Comprehensive Lifetime Warranty
Ordering Information -
| Fiber Type | Part Number | Description | Wavelengths (nm) |
Optical Power Budget(dB) | Max. Distance(Km) | No. of slots |
| Multi-mode (62.5/125μm) |
FTD110DB-SMR3 | 3 Independent Optical Channels 8-Bit Digital Video Receiver with Bi-directional Data Transceiver | 1310 | 1550 | 23 | 1 | 2 |
| Single-mode (9/125μm) |
FTD110DB-SSR3 | 3 Independent Optical Channels 8-Bit Digital Video Receiver with Bi-directional Data Transceiver | 1310 | 1550 | 17 | 20 | 2 |
| Options | - ST type connector is standard. For FC type, specify “F” in the suffix. E.g. FMR3. |
| - For Standaone type, please add “SA”. E.g. SMR3SA | |
| - Please feel free to consult factory if longer transmission distance is required. | |
| Power Adaptor | - Power adaptor is included for Standalone type only. |
| Rack Mount Chassis | - FT-C18 is to be purchased separately. Please refer to accessories section for the details. |
| Video | |
| Number of Channels | 3 (from independent Transmitters) |
| Format | NTSC/PAL/SECAM |
| Input/Output | 1 Volt pk-pk (75 ohms) |
| Bandwidth | >=6MHz |
| Differential Gain | <1% Typical |
| Differential Phase | <1 Degree Typical |
| SNR-CCIR weighted | >60dB |
| Data | |
| Number of Channels | 3 |
| Data Direction | Bi-directional |
| Data Interface | RS232, RS422, RS485 2 or 4-wire Tri-state |
| Selection Method | DIP switch-selectable |
| Data Rate | 0~256kbps |
| Data Format | MPD (Manchester, Bi-phase, etc) |
| LED | |
| Video Signal Indication (Presence) | Green LED lit |
| Data In / Out | Red/Green LED lit |
| Optical Carrier Detected | Yellow / Active |
| Power | Red / On |
| Connectors | |
| Video Output | BNC |
| Optical Input / Output | ST (standard), FC (optional) |
| Data Input / Output | 7-pin screw terminal |
| Power(Standalone) | 2-pin screw terminal |
| Power(Rack-Mount) | Bus connector |
| Electrical and Mechanical | |
| Power(Standalone) | 12VDC @ 8.4W |
| Power(Rack Mount) | From FT-C18 Chassis |
| Dimensions(WxHxD)(Standalone) | 156 x 50.5 x 223mm(Max) |
| Dimensions(WxHxD)(Rack Mount) | 148 x 41.4 x 213mm(Max) |
| Shipping Weight(Standalone) | 0.9kg |
| Shipping Weight(Rack Mount) | 0.4kg |
| Environmental | |
| Operating Temp | -40°C to +75°C |
| Storage Temp | -40°C to +85°C |
| Relative Humidity | 0 to 95% non-condensing |
| MTBF | > 100,000 hours |
